NNetify
SD-WAN

What options do 5G WAN services bring to business? (2026 update)

Harry YellandUpdated 20 November 20269 min read
What options do 5G WAN services bring to business? (2026 update)

In the UK, the government's 'Be Ready' campaign is increasingly suggesting that people and businesses take actions to be less reliant on land-based infrastructure, which has significant relevance for those who are dependent on their broadband to carry all business activity.

Continue from this article

Describe what you need

Your first sentence is drafted from this article. Edit it, or replace it with your own words: sites, regions, what must not go down.

Drafted from this article. Everything you type stays yours to edit before you approve any next step.

Compare the research, prepare one brief and choose which suppliers Netify may approach.

Your requirements open in the private sourcing journey. Review the evidence, choose recipients and confirm your work email before Netify reviews an introduction. A full RFP can follow from the same brief.

Take these requirements into provider sourcing

Supplier responses depend on the scope and the suppliers accepting the request. No supplier is contacted by opening this page.

Working with an assistant? Connect netify.co.uk/sase/api/mcp/ and use prepare_sourcing_plan with this page as context.

However, by utilising the likes of 5G WAN services, you can reduce your reliance on standard broadband, both as a backup option or as a secondary line (as seen in SD-WAN and SASE solutions), in which 5G can be used to carry less essential traffic and leaves greater bandwidth available on your broadband connection for business-critical use - making it an ideal resilience choice, regardless of the government's campaign.

With so many 5G products on offer, such as fixed wireless access routers, backup SIMs, 5G+ standalone plans and network slicing, it can be difficult to determine which is right for each site and how it should sit alongside your existing broadband.

In this article, we'll cover how 5G builds on 4G, what 5G WAN options are available (including fixed wireless access and network slicing), how to plan 5G into an SD-WAN and how to buy it through BT with Netify.

💡
At Netify, we’ve been a BT Authorised Partner since 2012, so we can help you match BT’s 5G and SD-WAN options to each of your sites and buy them through us.

Is 5G actually worth it over 4G?

4G has been the default wireless WAN option for well over a decade, as the move to an all-IP network (in place of the circuit-switched voice and SMS that 3G still relied on) significantly improved the bandwidth available to connected devices. However, whilst 4G could theoretically offer you with up to 1 Gbps downstream, this was largely impractical, being for a non-moving device that assumes ideal radio conditions and a single device on the cell, with issues being further compounded in a weak signal area.

When comparing 4G with 5G, the latter benefits from higher-order QAM and larger MIMO antenna arrays that give a more usable signal in the same location, a dedicated standalone core that brings lower latency and network slicing, and extra spectrum (including mmWave in busy city areas), with EE’s own figures putting average 5G speeds at 146Mbps against 40Mbps on 4G.

How much 5G coverage can you rely on in the UK?

The UK's main networks are EE (BT), O2 (VMO2) and VodafoneThree, with their coverage being fairly widespread:

  • EE's 5G+ network reaches around 54 million people (78% of the population) with a target of 99% by the end of March 2030,
  • O2’s 5G coverage is the widest of the three on its own figures, with its 5G+ (standalone) network reaching 86% of the outdoor population.
  • VodafoneThree coverage is growing quickly, with 5G+ population coverage up from about 46% to 60% in the last year and around 71% of the population able to access its fastest 5G speeds - as well as having committed £11 billion to its network including 5G standalone for 99% of the population by 2030.

Which 5G WAN options can UK businesses buy?

There are two main options available to the UK market, fixed wireless access and network slicing - both of which offer different capabilities:

Fixed wireless access

Fixed wireless access (FWA) uses a 5G router with a SIM to deliver a site’s internet connection over the mobile network instead of a copper or fibre line, which makes it the most direct way to put 5G to work at a site. The main attraction is speed of installation, as there’s no waiting on an Openreach order or a build, and BT’s managed site installation service can have FWA set up in days. That makes it a good fit for new sites, pop-ups and temporary locations, and for any site waiting on fibre where 5G can act as the primary line until the fixed connection goes in.

For most businesses though, we think FWA earns its place as a secondary line, either as a backup or as part of an active-active SD-WAN setup in which less essential traffic is steered over 5G and your broadband is left free for business-critical use.

💡
BT’s Managed SD-WAN supports this with its mobile data access options, including active-active over 5G where it’s available.

Network slicing

Network slicing reserves a dedicated portion of a 5G standalone (5G+) network for a particular business or use, so traffic keeps its performance even when the wider network is busy. It only works where 5G standalone coverage is in place, which is why it’s still limited to specific products and areas, with the main launches so far being:

  • Vodafone Business 5G+ Local Slicing (April 2026), which gives guaranteed performance across an area of up to 5 km² such as a campus or venue.
  • EE Fast Lane (August 2026), available on small business handset plans with a 5G+ handset.
  • VodafoneThree SuperMobile for Business (September 2026).
  • BT and Ericsson’s additions to BT’s 5G standalone core (March 2026), which add the network slice selection and network exposure functions that slicing depends on.

In our view, slicing is the one to ask your provider about for sites running live video, card payments or other applications that can’t cope with a slow or congested connection, and for most sites FWA and a 5G backup will cover what’s needed today.

How should you plan 5G into your SD-WAN?

Many businesses already use 4G/LTE in their WAN, most commonly as backup for smaller branches if the primary circuit goes offline, and SD-WAN has made that far easier, as wireless can sit on standby, run alongside a wired link (active-active) for extra resilience or be combined across several carriers. Using 5G needs a 5G-capable modem, so devices with an integrated 4G modem will need replacing, whereas those with a swappable module can be upgraded by changing it.

SD-WAN appliances tend to use wireless as an external option (a USB device or a standalone router with an Ethernet handoff), so in most cases you can move to 5G by swapping that external device without touching the appliance itself. Where a Managed Services Provider (MSP) looks after your WAN, the refresh may also be written into your contract at no extra cost, which we'd always recommend verifying with them before assuming it's included.

Before you upgrade, we'd recommend checking the following:

  • Whether each site has 5G, and 5G standalone, coverage on the networks you plan to use.
  • Whether the SD-WAN appliance takes an external 5G router or USB modem, or has an integrated 4G modem that needs replacing.
  • Whether an external antenna and a site survey are needed for weak signal locations.
  • Which operator each link uses, so primary and backup don't share one network.
  • Whether the link is standby or active-active, as this changes data usage and cost.
  • How the SIM data allowance is shared across sites, as a link carrying live traffic can use data quickly.

It depends on the site, though in our view 5G has earned its place in most WAN designs, and the quickest way to decide is to match the role you need it to play against what each option can realistically deliver:

5G WAN option

Best for

What to watch

Standby backup

Branches and retail sites with a fixed primary line

Use a different network to the primary link wherever you can.

Active-active

Sites that want extra bandwidth and resilience at the same time

Data is used continuously, so check the allowance and cost.

Fixed wireless access as primary

Temporary sites, new premises and locations where fixed lines are slow or unavailable

Speeds vary with signal and cell load, so survey first.

5G standalone with slicing

Sites needing prioritised traffic such as payments or live video

Offers are limited to specific areas and plans, so confirm coverage and the SLA.

What new business opportunities does 5G open up?

A site that would have waited weeks or months for a fixed line can now be connected within days, and businesses can operate in places that were unusable on 4G (pop-up kiosks, temporary sites, vehicles and rural premises being good examples), whilst improvements in SD-WAN make a battery-powered multi-carrier setup realistic for extremely resilient and private connectivity back into your corporate network wherever you are. 5G also supports IoT, with many low-power sensors communicating across large distances, though most IoT use cases on public networks are still developing, so we'd treat them as a longer term opportunity.

How do you buy 5G WAN services through BT with Netify?

BT delivers its 5G through EE, and it's built into BT's managed SD-WAN range instead of being sold as a separate add-on, with mobile data access available as a backup, backup plus or active-active link (and a prime option on the Fortinet platform), where active-active is only available over 5G where 5G is available to you. You can choose BT Managed Mobile Data Access, either as an external device or an internal hub, or a customer managed option, and BT's SASE offering also steers traffic across 5G, fibre or broadband through intelligent routing, which we see as a useful differentiator against MSPs without a mobile network of their own.

BT's mobile data access runs over the public mobile network, so it can be affected by congestion, interference and a lack of 5G coverage, none of which BT controls, and we'd always recommend checking the coverage position at each address before you commit.

What can resellers sell with BT 5G?

If you're an MSP, a telecoms reseller or an IT reseller, 5G is an easy way to lift the value of every BT connectivity and SD-WAN order, as the likes of a 5G backup, active-active links and FWA for temporary sites can all be added to the same quote.

💡
Through the Netify Reseller Programme you can add BT's 5G-capable SD-WAN, SASE and connectivity range to your portfolio.

When you're building a 5G proposal, our suggestion would be to include the following:

  • A survey or coverage check for every site before 5G is positioned as the primary link.
  • An external antenna option for sites with weak indoor signal.
  • A second operator for sites where downtime is costly.
  • Clear data allowances for active-active links, so customers aren't surprised by usage.

Which 5G WAN route should you shortlist?

At Netify, we'd say 5G has moved from promise to practical option, with fixed wireless access giving businesses a quick route to connectivity where fixed lines are slow and 5G standalone with network slicing adding prioritised traffic for the sites that need it.

Harry Yelland
Cybersecurity Writer

Harry holds a BSc (Hons) in Computer Science from the University of East Anglia and is ISC2 Certified in Cybersecurity (CC). He serves as a Cybersecurity Writer here at Netify, where he specialises in enterprise networking technologies. With expertise in Software-Defined Wide Area Networks (SD-WAN) and Secure Access Service Edge (SASE) architectures, Harry provides in-depth analysis of leading vendors and network solutions.

Fact checked by: Robert Sturt - Managing Director, Netify

Frequently Asked Questions

What is the difference between 5G and 5G+?

5G+ is EE's name for 5G standalone, which uses a dedicated 5G core and enables features such as network slicing and lower latency, whereas standard 5G runs on top of the 4G core. Standalone coverage is still growing, so we'd always recommend that you check 5G+ coverage before rolling out to sites if 5G alone isn't able to support your business needs.

Is network slicing available to UK businesses?

Yes, as Vodafone Business has offered 5G+ Local Slicing since April 2026 and SuperMobile for Business since September 2026, whilst EE's Fast Lane is available to small businesses on eligible plans with a 5G+ handset. These are tied to specific areas and plans, so the SLA and coverage area need confirming before buying.

Is 5G fast enough to replace a leased line?

Not for most permanent sites. FWA works well as a primary connection where fixed options are slow or unavailable, but speeds vary with signal and cell load, so we'd still recommend a leased line or fibre as the primary with 5G alongside it for resilience.

Do we need new SD-WAN hardware to use 5G?

Usually not, as most SD-WAN appliances use an external USB modem or Ethernet-connected router for wireless, which you can swap for a 5G one. It is worth noting that devices with an integrated 4G modem will not typically support 5G and will need to be replaced.

Should we wait for 5G before deploying SD-WAN?

No - we've found that most SD-WAN offerings support external 5G and therefore we'd recommend that you deploy 5G now and upgrade to a supporting SD-WAN solution later.

Does BT offer 5G for SD-WAN?

Yes, as BT's Managed SD-WAN includes mobile data access over EE as a backup, backup plus or active-active link, with active-active only available over 5G where 5G is available to you. We'd suggest speaking to a Netify advisor so the right option is matched to each site.

Can resellers add BT 5G to their portfolio?

Yes, through the Netify Reseller Programme, which lets MSPs, telecoms resellers and IT resellers sell BT's SD-WAN, SASE and connectivity range with 5G included. Get in touch and we'll talk you through how it works.

4G, 5G & LEO Satellite WAN Resilience for Energy Substations & Field Assets

See how multi-operator 4G/5G cellular and LEO satellite underlays pair with SD-WAN to protect remote substations, pipelines, and generation sites in our SD-WAN and SASE for Energy & Utilities Architecture Guide.